Pics of my FC begging for a front mount
06-12-04, 11:56 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Upstate NY
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Pics of my FC begging for a front mount
I've been working on my car the past couple days, and got the front area in front of the radiator all stripped out ready for the front mount... now i just need the front mount lol. A/C compressor and condensor have all been removed and i cant wait to get it all back together. Here are the pics of my new engine bay.
It wont let me post the pics, so please see my webshots page where i have the pics.
http://community.webshots.com/album/150075931oloSlk/1
It wont let me post the pics, so please see my webshots page where i have the pics.
http://community.webshots.com/album/150075931oloSlk/1
06-13-04, 01:27 AM
#3
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Upstate NY
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
i was going to sell it, but things werent going well, so i started ripping it apart
lol
once i repair the snapped bolt, i'll be putting the upper and lower intake manifolds back in... hopefully w/ 850cc injectors
then the turbo is gonna go back on... and when i have some cash, koyo radiator, fmic, and the list goes on
lol
once i repair the snapped bolt, i'll be putting the upper and lower intake manifolds back in... hopefully w/ 850cc injectors
then the turbo is gonna go back on... and when i have some cash, koyo radiator, fmic, and the list goes on
06-13-04, 01:30 AM
#4
Rotors? What Are Those?
iTrader: (6)
Join Date: Jul 2003
Location: Jefferson City, Tn
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
sounds nice man not bad good luck on it tho im shure a front mount aint that expensive if you do it yourself just buy an intercooler of ebay and some strainless steel piping or aluminum go to a local muffler shop and have them weld it all together
TwEaK
TwEaK
06-13-04, 01:38 AM
#5
Senior Member
Thread Starter
Join Date: Jan 2004
Location: Upstate NY
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
there is an exhaust shop that custom made intercooler piping for a friend of mine... they only charged like $60 or so for everything... including the piping. So i think i'll get it mounted, and then go from there. I may use bendable exhaust tubing to get to the shop... that way it can be used as a "template" as well.
Thread
Thread Starter
Forum
Replies
Last Post