Where in gods name does the harness at the top of the pedal arms go on a S5 T2... i know one is the brake-light switch, but the one at the top of the gas pedal i have no idea. Is there a sub-harness from the brake switch to the rest of the main harness?

Is it different to the S4 ?
i was checking out a buddies S4 T2 vert and it has No harness at the top of the pedal. And another buddy has an S5 n/a - T2 conversion and has no switch at the top of the gas pedal, but says the harness coming from the brake light switch goes to the ignition?

thanks

 

S5 has a sensor on the gas pedal. Its on at half throttle, off below. On an n/a, its used so your aux ports don't open on below half throttle. I'd imagine it does somethign spiffy on the tii too. (timing or something).

There shouldn't be many like-shaped harnesses down there that fit it... its just a matter of finding it.

 

yeah, there are 4 male spades on the top of the pedal at a switch sensor.. but i can't tell if its just an unusual plug, or 2 different plugs.
(this is for a S4 n/a)
What i would like to know, is, what does the plug look like on an S5 T2
do i have to change it over to s5?

maybe people that have done auto-manual swaps might know this?
thanks.

 

oh, my bad, you're putting s5 pedals in an s4? The FSM should have a picture and pinout on the harness, you'll have to get a copy of both series diagrams though. S4 to find the original harness pinout, s5 to find the new one. They may be the same.

 

read my sig in my first post.. :P

but yeah, not tons of help in the FSM

 

anyone with pictures of the pedals in an S5?
need some help on this.

 

I can take a picture tomorrow afternoon sometime of mine, my dash is off and all.

Send me a PM to remind me if you still need it.

--Gary