PassengerSide Harness Help
#1
Nekurd
Thread Starter
Join Date: Feb 2006
Location: California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
PassengerSide Harness Help
So I'm working with a 91' n/a passenger engine harness, actually have two and both are incomplete. I was told by the person who gave them to me, that i could transfer the plugs from 1 to the other to make a complete one. I've done so except with these 2 wires, which have been cut.
I know its hard to see but its at the end of the harness, not the ecu plug end but the other end. This is the picture of the group of plugs around it. (Don't mind the Korean newspaper... gotta use whats available)
I really don't know what these two wires do. If they are required to run the engine then I'm pretty screwed... I'm trying to avoid buying a new harness or just the plugs from elsewhere... hopefully it connects to the headlights or something.
ps. This is for my 91 n/a engine swap into my 79' sa, so I only need the engine harness to make the engine work and nothing else. Just so you guys/gals don't think I'm crazy for being okay with having no working headlights.
I know its hard to see but its at the end of the harness, not the ecu plug end but the other end. This is the picture of the group of plugs around it. (Don't mind the Korean newspaper... gotta use whats available)
I really don't know what these two wires do. If they are required to run the engine then I'm pretty screwed... I'm trying to avoid buying a new harness or just the plugs from elsewhere... hopefully it connects to the headlights or something.
ps. This is for my 91 n/a engine swap into my 79' sa, so I only need the engine harness to make the engine work and nothing else. Just so you guys/gals don't think I'm crazy for being okay with having no working headlights.
#5
Nekurd
Thread Starter
Join Date: Feb 2006
Location: California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Its the wires to the right of the pliers, if you look at the group with the long green wire, there are 2 cut wires right when they start to split up. They dont seem to have any abstract color, just black... both of them
Trending Topics
#8
I'm always afraid of condeming grounds, that grounds under dynamic chamber to the block
personaly I would not recomend you not putting it on.your not loosing anything by putting it back on.I hope this could help you
personaly I would not recomend you not putting it on.your not loosing anything by putting it back on.I hope this could help you
#10
I would put the ground back on' I will check tomorow for what this ground is for. grounds close cercuts if you have an open cercut something won't work I'll check into it for you
#11
Nekurd
Thread Starter
Join Date: Feb 2006
Location: California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
I think we are confused on what 2 black wires these are. I took another look at my harness and it seems that the eyelet ground is on another part of the harness, unless there are 2. These two wires are in the same bunch as the last 2 injector plugs.
Thread
Thread Starter
Forum
Replies
Last Post
scissorhands
New Member RX-7 Technical
0
09-16-15 01:25 PM