I just bought my FC and the passenger window doesnt move. i took the door panel off and there is a plastic sheet covering the whole door. the switch on the drivers side wont open the passenger window either so im assuming its the motor itself. i searched the archives and the rest of the forum and cant find anything about this. i need help on what to look for and what to check because i dont know what each pin on the window connector does. im assuming one is positive for moving the motor one way, one is negative for the other way, and one is ground. if someone has the pin configuration or anything else that might help please let me know. i need to get my window working.


-Matt

 

http://208.62.166.66:82/guest/shop_manuals/

FSM's for these cars are found ^

look at the wiring diagram's, learn to read em, and you'll be able to do lots of fun (and not so much fun) fix it stuff

good luck homie

 

thanks man

 

Probably a bad drivers window switch, check the passengers window lock out on the drivers switch.

the motors almost never fail.



Please search next time, as this has been covered quite a few times