2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Part number piston inner rear caliper

Thread Tools
 
Search this Thread
 
Old Jun 16, 2016 | 02:22 PM
  #1  
rx7neo's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
 
Joined: Dec 2013
Posts: 18
Likes: 0
From: chile
Part number piston inner rear caliper

I need the part number of the pistons of the rear caliper to buy and repair my rear caliper

or if there are any full repair kit come piston



example of what I need



any advice or information is appreciated
Reply
Old Jun 16, 2016 | 11:35 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
..and this would be for what SERIES or year of Car?
Reply
Old Jun 17, 2016 | 11:57 AM
  #3  
rx7neo's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
 
Joined: Dec 2013
Posts: 18
Likes: 0
From: chile
Originally Posted by misterstyx69
..and this would be for what SERIES or year of Car?
They were installed in a savana and install in my fc 86 and make the swap

but they are completely oxidized and want to recover full

Reply
Old Jun 18, 2016 | 06:27 AM
  #4  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
The parts catalogue doesn't show the number for that part.It does show like rebuild parts..around it,like seals etc.
See Foxed.ca and you can get manuals,parts manual,wiring diagrams etc all for free off the internet.

If you need to,you can get cheap calipers at RockAuto.
I priced them about 102 Canadian.
Those units contain the bracket for the caliper.

If you go that route you should note that there are differences in 4 to 5 lug brakes and they call it Standard and Hard suspension.
I can't fully recall which is which BUT if you look at the Parts manual they state that on some pages and that will stop you from grabbing the wrong part.
Reply
Old Jun 18, 2016 | 08:56 AM
  #5  
j9fd3s's Avatar
Moderator
Community Builder
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2001
Posts: 31,835
Likes: 3,233
From: https://www2.mazda.com/en/100th/
piston is FB01-26-660
Reply
Old Jun 18, 2016 | 12:26 PM
  #6  
rx7neo's Avatar
Thread Starter
Junior Member
Tenured Member: 10 Years
 
Joined: Dec 2013
Posts: 18
Likes: 0
From: chile
Originally Posted by If you need to,you can get cheap calipers at [url=http://www.rockauto.com
RockAuto[/url].
I priced them about 102 Canadian.
Those units contain the bracket for the caliper.
thank you very much, does not know this product to buy, it was what I needed to continue the reconstruction of my fc

Thanks for the information.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shadowboym
Megasquirt Forum
3
Mar 25, 2016 10:19 AM




All times are GMT -5. The time now is 03:03 AM.