parallel fuel mod. ?
Thread Starter
Senior Member
Joined: Sep 2003
Posts: 423
Likes: 0
From: Syracuse New York
parallel fuel mod. ?
I have a fpr with one inlet and one outlet can i put a Y fitting in front of the inlet of the fpr to run the primary in one and secondary in the other, or do i need to get a duel fpr. Can I get some input on this. Thanks Tony
Hmmm.. One inlet and one outlet.
I guess you can Y your main supply to the 2 rails, then y them back to one for the inlet. Then one outlet for tank return. Mine has 2 inlets and one outlet, so I feed 2 rails, then 2 lines to the FPR, back for a single return.
I guess you can Y your main supply to the 2 rails, then y them back to one for the inlet. Then one outlet for tank return. Mine has 2 inlets and one outlet, so I feed 2 rails, then 2 lines to the FPR, back for a single return.
Thread Starter
Senior Member
Joined: Sep 2003
Posts: 423
Likes: 0
From: Syracuse New York
Originally Posted by Crusader_9x
Yes you can put a y in between the rails and fpr to bring it back down to one line.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
Adaptronic Cranking fuel table messed up?
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
