2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Overheating of Blown engine.

Thread Tools
 
Search this Thread
 
Old 03-16-03, 04:22 PM
  #1  
Full Member

Thread Starter
 
JDMkamikazeeRX's Avatar
 
Join Date: Mar 2003
Location: Aurora, IL
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
Question Overheating of Blown engine.

I have a questions here. My rear rotor blew about 2 1/2 months ago. My car mostly sat durring that time, I started it up 2 or 3 times. The engine will still run but idles really rough and has to stay above 1700k. This weekend it is finaly warm outside and I have my rebuilt engine on the way so I would like to move my car over to my friends garage where I am going to stick the engine in. I was able to get the engine running again after being pretty flooded, but now the engine runs REAL hot. I started the car and let it idle for about 10 min, then I drove it around for about 5 min, when I go back to my house it was running hot and then I just died on me. That night I started it up again, it was just slightly flooded, and drove it a little bit, and it was not getting hot like before. Well, not today, I started it up again, it was not flooded, idled it for about 5 min, then idled it at about 3.5k for about 10 min, the engine was getting REAL hot again.
I was wonder what this could be? Could I also damage any else on my car because I would not like to replace everything on my car. I dont realy care about hurting my engine, since it is already gone, but I would not want to damage anything else on my car.
Also, before my engine blew I never had overheating problems.

Sorry for the long post

thanks
~Anthony
Old 03-16-03, 09:49 PM
  #2  
Full Member

Thread Starter
 
JDMkamikazeeRX's Avatar
 
Join Date: Mar 2003
Location: Aurora, IL
Posts: 86
Likes: 0
Received 0 Likes on 0 Posts
ttt
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Coochas
1st Generation Specific (1979-1985)
44
11-05-19 11:08 PM
Rotafuzz
New Member RX-7 Technical
3
09-30-15 09:55 AM
Devon Murray
Introduce yourself
2
09-25-15 09:41 AM



Quick Reply: Overheating of Blown engine.



All times are GMT -5. The time now is 12:04 AM.