2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

over heating cause of car not starting?

Thread Tools
 
Search this Thread
 
Old Jul 19, 2004 | 06:35 PM
  #1  
RX-7_Stylist's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 5
Likes: 0
From: Arizona
over heating cause of car not starting?

well last week i was driveing down the freeway when i noticed white smoke coming out of my hood, so i pulled over and turned of the car as soon as possible. it ended up being a hole in the radiator hose. i had the car towed home and replaced the hose and refilled with coolant. however i can not get the car to start back up. i took out the spark plugs and notice the top two seemed wet, dried them off and put them back in. The car started and seemed to run fine, the next day however i go to start it up and nothing, jsut doesnt want to crank over. i checked to dipstick and could not find any trace of water. i cant seem to figure out why my car wont start. any helpful hints or even theoroes would be greatful. thanks....
Reply
Old Jul 19, 2004 | 06:58 PM
  #2  
Syonyk's Avatar
Rotary Freak
Tenured Member 05 Years
 
Joined: Jun 2004
Posts: 2,718
Likes: 1
From: Ames, IA
Start troubleshooting.

Can you turn the engine over by hand (use a socket on the PS pump pulley)?

Is the starter engaging?

Do you have sufficient voltage to turn it over? If you left the key in accessory position while it was being towed, or if the flashers were on for a long period, it may have drained the battery.

-=Russ=-
Reply
Old Jul 19, 2004 | 07:01 PM
  #3  
WAYNE88N/A's Avatar
Lives on the Forum
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 5,721
Likes: 3
From: Coldspring TX
Pull the plugs and crank her over- see any water or water vapor poofing out?
Reply
Old Jul 19, 2004 | 08:27 PM
  #4  
RX-7_Stylist's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 5
Likes: 0
From: Arizona
i pulled the plugs and cranked it saw some vapor coing out but all i could smell was gas
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
Feb 24, 2019 12:09 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM
04G35S
3rd Generation Specific (1993-2002)
4
Aug 14, 2015 07:31 AM




All times are GMT -5. The time now is 10:10 PM.