2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Over heated my engine

Thread Tools
 
Search this Thread
 
Old Mar 2, 2009 | 03:15 PM
  #1  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
Over heated my engine

So my radiator cracked while I was on the freeway and I hadnt noticed till my car was all the way hot. I got off at the next exit and pulled over to the side to let it cool. Let it cool for awhile and put some water from a couple of water botttles I had in my car. Car was having trouble starting after that, but I finally got it started, and was able to drivwe to the nearest gas station. I fuilled the radiator totally full so I could get it back home, but it would not start at all after that, even when it was totally cold. Im wondering if my engine is shot now, or maybe what the problem could be. It turn, but it doesnt even begin to sound like its gonna start. So if anybody knows whats wrong, or has had something similar, any help would be appreciated. Thanks
Reply
Old Mar 2, 2009 | 03:34 PM
  #2  
dawicka2's Avatar
well rested,buffet o food
Tenured Member 05 Years
 
Joined: Dec 2006
Posts: 1,605
Likes: 1
From: NY
Things warp like mario brothers due to heat.

Check compression. All the way hot is bad.

Oldschool is funny as hell.


John ny
Reply
Old Mar 2, 2009 | 03:47 PM
  #3  
87 t-66's Avatar
not a drifter
Tenured Member: 20 Years
iTrader: (133)
 
Joined: Jun 2004
Posts: 9,337
Likes: 6
From: Columbus, Ohio
Originally Posted by dawicka2
Things warp like mario brothers due to heat.
Reply
Old Mar 2, 2009 | 04:08 PM
  #4  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
[QUOTE=dawicka2;9011420]Things warp like mario brothers due to heat.

ha ha, good one
Reply
Old Mar 2, 2009 | 04:18 PM
  #5  
dawicka2's Avatar
well rested,buffet o food
Tenured Member 05 Years
 
Joined: Dec 2006
Posts: 1,605
Likes: 1
From: NY
Thanks^^^^^^ Now check compression.

john ny
Reply
Old Mar 2, 2009 | 04:22 PM
  #6  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
sure thing, just have to read how to do it now
Reply
Old Mar 2, 2009 | 09:41 PM
  #7  
hurleysurf24's Avatar
wtf rotary wtf
Tenured Member 15 Years
iTrader: (3)
 
Joined: Aug 2005
Posts: 2,756
Likes: 1
From: Who knows
pull spark plugs put on compression tester
Reply
Old Mar 3, 2009 | 11:48 PM
  #8  
nitronatefc's Avatar
Topless, & Barely Legal
Tenured Member 15 Years
iTrader: (2)
 
Joined: Mar 2005
Posts: 492
Likes: 0
From: Stevens Point, WI
Maybe the short trips and turning the car on and off flooded it. Pull the underhood EGI INJ fuse, crank the motor for a few seconds, replace fuse, and try to start it up then.
Reply
Old Mar 4, 2009 | 01:21 AM
  #9  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
yea, I did try that a few times. Im checking compression tomorrow. Funny thing is, when I pull the egi fuse, the engine sounds exactly the same as it does when its out. So its not trying to run at all with the fuse in. I wonder if thats another problem
Reply
Old Mar 5, 2009 | 03:38 PM
  #10  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
So ive checked my compression, and its reading at about 30. Is that right? would it read that low even if it needed a rebuild? Maybe Im not checking it correctly. Any help out there?
Reply
Old Mar 5, 2009 | 03:51 PM
  #11  
87 t-66's Avatar
not a drifter
Tenured Member: 20 Years
iTrader: (133)
 
Joined: Jun 2004
Posts: 9,337
Likes: 6
From: Columbus, Ohio
30 psi? thats really low...
Reply
Old Mar 5, 2009 | 04:29 PM
  #12  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
Yea I know. Ive had some issues with it flooding before, and when I try to start it, it sounds like it is. Ive tried the egi fuse like before, but still no luck. Just sounds like its turning and turning, but not jumping like its trying to start
Reply
Old Mar 5, 2009 | 06:08 PM
  #13  
frank the tank's Avatar
Thread Starter
Full Member
 
Joined: Jan 2008
Posts: 51
Likes: 0
From: Corona, Ca
please anybody. Really need some help here
Reply
Old Mar 6, 2009 | 02:45 AM
  #14  
RotarySupra's Avatar
ZOOM-ZOOM Forever!
Tenured Member 15 Years
iTrader: (-1)
 
Joined: Jun 2005
Posts: 512
Likes: 0
From: SoCal/Arizona
Sorry to break it to you.........your motor is shot.exact same thing that happen to me.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
befarrer
Microtech
3
Aug 22, 2015 05:52 PM
befarrer
2nd Generation Specific (1986-1992)
4
Aug 14, 2015 04:18 PM




All times are GMT -5. The time now is 07:11 PM.