2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Over Cooling? Is there such a thing?

Thread Tools
 
Search this Thread
 
Old Mar 19, 2004 | 03:09 PM
  #1  
Mildseven's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Jan 2004
Posts: 105
Likes: 0
From: CA
Over Cooling? Is there such a thing?

I read a thread and said that if one would run an electric fan on all the time, the engine will be over cooled. (Temperature wise not style)
Is there such a thing as over cool?
What are the draw back of over cooling?
Someone please help. Thanks
Reply
Old Mar 19, 2004 | 03:19 PM
  #2  
Turbonut's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Feb 2002
Posts: 3,993
Likes: 68
From: NJ
As long as you have a thermostat, I can't see how you could overcool an engine. Years ago, on a piston engine (BB Chevy), I got caught when the weather dropped and didn't have a thermostat installed. Driving home I didn't have any heat and the gauge wouldn't come off cold. Naturally, if you installed a 4 core huge radiator and increased the volume substantially, it would take a lot longer to heat up the complete water system, especially on a cold day. The thermostat would keep opening and closing to adjust. My '89 TII has never, never gone over 1/2, hottist day with a/c on. I would say the factory cooling system satisfactory if in good condition.
Reply
Old Mar 19, 2004 | 03:28 PM
  #3  
Turbonut's Avatar
Eats, Sleeps, Dreams Rotary
iTrader: (1)
 
Joined: Feb 2002
Posts: 3,993
Likes: 68
From: NJ
Just wanted to add, if you did run without a thermostat, or a much lower stat, I feel wear could be more significant, and also the engine would be running richer.
Reply
Old Mar 20, 2004 | 10:07 AM
  #4  
OWNED's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Jan 2004
Posts: 208
Likes: 0
From: Calgary, Alberta, Canada
Well, from what I learned in Mech class, it IS possible to overcool your engine.

Overcooling may be indicated by slow engine warm up, insufficient warmth from the heater, low fuel economy, sluggish engine performance, or a low reading from the coolant temperature sensor.

Overcooling can cause increased part wear. Because parts are not at full operating temperature, their clearances will be too great. The parts will not expand enough to produce the correct fit.
Reply
Old Mar 20, 2004 | 10:40 AM
  #5  
andrew lohaus's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 1,255
Likes: 0
From: fl
also, an engine acheives greatest effecienccy at a certain temp.
Reply




All times are GMT -5. The time now is 09:09 PM.