omp pump removal question did search
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: North Carilona
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
omp pump removal question did search
Well I was cleaning under my hood to find my oil leak when I pulled on one of the oil lines going up to the oil injectors it pulled right out and it was burnt right off. So I pulled my intake and there is only one oil injector still hooked up. So I have decide to remove the omp but I can't get the oil injectors out the are stuck in there can't get them to move. So I was wondering if I could just plug off the top off them where the vacuum line goes off with a vacuum plug or will I still have a vacuum leak. I need help. Thanks in advance guys.
#4
Senior Member
Thread Starter
Join Date: Jul 2004
Location: North Carilona
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
the car runs but I have a major oil leak I am taken the omp completely off and blocking it off. My question is can I just but vacum plugs on the oil injectors where the vacumm line goes on top or will i still have a vacuum leak. I can't get them to come out of the motor.
#5
Send me your BMX parts
you can use vacuum plugs for the injectors, yes... As far as the OMP itself, leave the pump on, take off the lines and stick solid bolts inplace of the banjo bolts... Its easier.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM