Ok...now what..
09-13-01, 09:57 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2001
Location: NA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Ok...now what..
Well, I've got exhaust, pulleys, intake, and some other little nonHP goodies, but I want to boost some more HP. I'm thinking maybe an ignition system, or something around the fuel. What should I get now to get some more HP???
09-13-01, 11:53 PM
#2
rawr
iTrader: (2)
Join Date: Feb 2001
Location: Silver City, NM
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
G-Force ECU chip, 285$, holley is coming out with an intake manifold that is said to be good for 15-25hp, get a custom ram air setup for your intake to get some more air in there 
and anything you think will raise your hp, street port it
and anything you think will raise your hp, street port it
09-14-01, 12:06 AM
#3
Full Member
Join Date: Aug 2001
Location: houston tx
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
yo you'll be mad quick with some racing stripes and a big wing!! j/k dam rice, had someone tell me that before, I just laughed!
Get a bigger throttle body, 550cc fuel injectors, and S-AFC tune it in on a dyno, then you'll notice some hp. Did you get the under drive pulleys from RP? Did you notice a hp gain from them?
91 na
intake,exhaust, S-AFC
Get a bigger throttle body, 550cc fuel injectors, and S-AFC tune it in on a dyno, then you'll notice some hp. Did you get the under drive pulleys from RP? Did you notice a hp gain from them?
91 na
intake,exhaust, S-AFC
09-14-01, 07:12 PM
#4
Senior Member
iTrader: (2)
Join Date: Apr 2001
Location: Salt Lake City, UT
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
I think you answered you own question by saying BOOST and HP in the same sentance. T04 is the answer, and all the other junk you will have to get along with it. Thats were you'll get some gains. Im not much help, cuz I have a TII sorry Chip sounds good though
09-14-01, 11:01 PM
#5
Senior Member
Thread Starter
Join Date: Feb 2001
Location: NA
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Well, I like that chip idea? Where can I get one..and how much HP gain is obtainable through it? Right now though, I think I'm gonna go the bigger injectors/fuel pump/ and the safc. Then I'll finish my suspension and start saving for the rebuild and street port. Yes, I got the pulleys from RP...however, my car is STILL not put back together(I'm extremely lazy), and I've done other stuff like the exhaust and cai box so I dunno if I'll be able to distinguish between the mods. However, I do like the quality of the pulleys, very nicely made and recomend them for the price! Other companies want like $100+++ for theres...its crazy! Just go w/ the RP...and if you go w/ a dual alt pulley and main UD pulley, and remove the air pump...like me, you can just use stock sized belts...
09-15-01, 01:58 AM
#6
rawr
iTrader: (2)
Join Date: Feb 2001
Location: Silver City, NM
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
get the chip, i heard the g-force is good for 20 flywheel hp. then the injectors fuel pump and safc will get you more should get some 10mm wires and a crane hi-6 to help prevent detonation. i gotta get mine rebuilt, anyone got an engine they wanna sell that runs?? lol
should get some 10mm wires and a crane hi-6 to help prevent detonation. i gotta get mine rebuilt, anyone got an engine they wanna sell that runs?? lol
Thread
Thread Starter
Forum
Replies
Last Post
apreludem
2nd Generation Specific (1986-1992)
18
10-31-02 03:24 PM