takahashiRyosukeFC3S

I need to route a 4 prong molex plug through my firewall with four 20ga wires attached. I would like to get away with the stock holes and gromets, but if I really need to, where do I drill a new hole and install a gromet? my interior is already installed and I forgot to put this plug through first.

please help if you know where to wire something like this through.

thank you in advance for all your help,

TR

uRizen

iTrader: (2)

Molex like the computer PSU connectors? Just use a small screwdriver to remove the pins from connector and push them back in on the other side.

takahashiRyosukeFC3S

i actually have a tool to du that. it's a little thin wall tube and I have already done that and electrical taped them as a bundle. this whole thing is for a home fabricated CO2 intercooler sprayer, actuated by boost pressure or intake air temp.

thank you though,

I just cant seem to find a way to follow the main wire harness through the firewall on the passenger side. i puuled the charcoal can and the coolant overflow, but to no avail. how can i add my bundle to this harness?

thank you again,
TR

papiogxl

iTrader: (6)

there is a little nub on the grommet that you could cut and thenuse to send it through, it looks like this is the sort of thing it was made for.