ok getting some mixed communication
#5
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,949
Received 2,680 Likes
on
1,896 Posts
the ECU needs to see 15 Ohms of resistance.
so you can either run high impedance, 15 ohm injectors,
or
low impedance, 2-3 ohm injectors and 10-15 ohm resistor.
too little impedance will draw too much current and fry the injector driver in the ecu.
so you can either run high impedance, 15 ohm injectors,
or
low impedance, 2-3 ohm injectors and 10-15 ohm resistor.
too little impedance will draw too much current and fry the injector driver in the ecu.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM