Oil Suggestion
#2
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
This topic is posted by noobs about every week. If you are not yet comfortable with the Search engine on this forum, just scroll through the pages of this forum and you will find a thread on this subject fairly quickly.
If you do not see several pages of threads in this forum, you can change your settings as follows:
1. Left click on the "User CP" link at the top left of the web page.
2. From the Control Panel on the left side of the screen, left click on "Edit Options".
3. Scroll down to "Default Thread Age Cut Off", and select "Show All Threads".
4. Scroll down to the bottom of the page and left click on "Save Changes".
If you do not see several pages of threads in this forum, you can change your settings as follows:
1. Left click on the "User CP" link at the top left of the web page.
2. From the Control Panel on the left side of the screen, left click on "Edit Options".
3. Scroll down to "Default Thread Age Cut Off", and select "Show All Threads".
4. Scroll down to the bottom of the page and left click on "Save Changes".
#3
Clean.
iTrader: (1)
See FAQ, at the top of the 2nd gen section. For most people, any API 10w30 is best. But you're in Florida. If it's over 85 degrees a lot of the year then I'd get any API 20w50. Some people also recommend it for the turbo models. That said, oil is not your #1 concern. Get the list of scheduled maintenance from the owner's manual/Haynes manual/FSM (links in FAQ).
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM