2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Oil pressure question

Thread Tools
 
Search this Thread
 
Old 02-01-03, 06:45 PM
  #1  
Full Member

Thread Starter
 
dtrigg's Avatar
 
Join Date: Jan 2003
Location: california
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Question Oil pressure question

I have a 1986 13B with 137,000 miles. When driving the oil pressure reads 55--60. At idle the pressure reads 12-15. Is this normal?

Thanks in advance for your comments.
Old 02-01-03, 06:51 PM
  #2  
Eat Rice Don't Drive it.

iTrader: (3)
 
1987RX7guy's Avatar
 
Join Date: Nov 2002
Location: Laredo, Tx
Posts: 12,752
Likes: 0
Received 1 Like on 1 Post
Mine reads about 20 at idle and about 60-the top of the guage when I am at highway speeds(65-140) I guess it is normal.
Old 02-01-03, 06:57 PM
  #3  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes on 19 Posts
That's close to normal. Sounds slightly low at idle, but when you take into consideration the accuracy of the gauge/sender, I'd take no action to fix anything. I'd bet money if one took a mechanical gauge, say a Sunpro and installed it temp, both figures would show to be higher. Idle and cruise.

Go worry about something else. Your cars ok.
Old 02-01-03, 07:02 PM
  #4  
Full Member

Thread Starter
 
dtrigg's Avatar
 
Join Date: Jan 2003
Location: california
Posts: 51
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys. Appreciate the feedback. Just got it started after two weeks of being flooded. My first time at doing this. It's my normal daily driver and use my NSX for the weekend. It was a hoot to get back into the RX-7 after a few weeks in the NSX.
Old 02-01-03, 08:42 PM
  #5  
I wanta be with the BUC!

 
Cory Simpson's Avatar
 
Join Date: Jan 2003
Location: Knoxville, TN
Posts: 2,305
Likes: 0
Received 0 Likes on 0 Posts
Well that sounds alot better than mine mine has a pressure of about 1-2 psi and yes I typed that right I hope it is just the gauge but I think for the most part it is the engine that needs seriously rebuilt and also it has about 20 psi on the gauge at 2500-3000 rpm
Old 02-01-03, 08:59 PM
  #6  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 19 Likes on 19 Posts
Originally posted by Cory Simpson
Well that sounds alot better than mine mine has a pressure of about 1-2 psi and yes I typed that right I hope it is just the gauge but I think for the most part it is the engine that needs seriously rebuilt and also it has about 20 psi on the gauge at 2500-3000 rpm
sounds like you may have lost both the front cover O ring and the Eshaft thermo valve.

Either that or your sender is seriously mucked up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andyvideopro
General Rotary Tech Support
3
08-20-15 10:55 AM
stickmantijuana
20B Forum
8
08-18-15 02:46 PM



Quick Reply: Oil pressure question



All times are GMT -5. The time now is 01:36 PM.