Oil Nozzle Removal

Reply Subscribe

Thread Tools

Search this Thread

Mar 14, 2004 | 12:30 PM

devdog1one

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 291

Likes: 0

From: Mt. Pleasant, MI

Oil Nozzle Removal

I am trying to remove the two oil nozzles that inject oil into the rotor housing. They seem to be round. I am not sure of the proper removal process. Could someone help please me? I have already removed the oil metering pump. I have the RB Holley setup and plan on going premix.

I looked in the 87 Work Shop manual which was no help.

Thanx as always

Michael

Mar 15, 2004 | 08:09 AM

eyecandy

Rotary Freak

iTrader: (19)

Joined: Sep 2002

Posts: 2,928

Likes: 1

From: Pittsburgh,PA

You need a very thin/flat 14mm wrench, and just take your time to figure out which way to manauver the wrench in, then crank it loose...

Mar 15, 2004 | 08:30 AM

Hot_Dog

Rotary Freak

Joined: Nov 2001

Posts: 1,520

Likes: 231

From: Alexandria, VA

Re: Oil Nozzle Removal

Quote:

Originally posted by devdog1one
I am trying to remove the two oil nozzles that inject oil into the rotor housing. They seem to be round. I am not sure of the proper removal process. Could someone help please me? I have already removed the oil metering pump. I have the RB Holley setup and plan on going premix.

I looked in the 87 Work Shop manual which was no help.

Thanx as always

Michael

My memory is a bit "foggy", but I think I used a crow's foot socket to remove/install my oil injectors when I rebuilt my engine a couple years ago.

Hot_Dog
90 RX7 GXL
02 Acura RSX-S