Oil filter o-rings..
#1
Senior Member
Thread Starter
Join Date: Feb 2001
Location: louisville, KY
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Oil filter o-rings..
The oil filter o-rings which are prone to leaking.. is it mazdatrix p/n:
10-1601-9954.....O-RING OIL FILTER.....TOWER ALL.............. $ 3.30
?
Don't want to order the wrong part... Also, I hear there are 2 rings... do I need 2 of those, or is that a set?
Thanks!
-Tesla
10-1601-9954.....O-RING OIL FILTER.....TOWER ALL.............. $ 3.30
?
Don't want to order the wrong part... Also, I hear there are 2 rings... do I need 2 of those, or is that a set?
Thanks!
-Tesla
#2
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
That sounds correct, but you may want to ask Mazdatrix to make sure. You can also get the o-rings from your Mazda dealership. There are 2 o-rings, and the tightening torque on the two bolts is 6-8 ft-lbs.
#4
Do it right, do it once
iTrader: (30)
I've gone to my local parts store several times to buy the o-rings for the oil filter pedestal, cost is like $.35/ea. They have worked fine for about 6 FCs and 4 FDs I've done.
Your original rings will look different because they are flattened, just buy some regular o-rings...
Jeff
Your original rings will look different because they are flattened, just buy some regular o-rings...
Jeff
#5
Senior Member
Thread Starter
Join Date: Feb 2001
Location: louisville, KY
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by turbojeff
I've gone to my local parts store several times to buy the o-rings for the oil filter pedestal, cost is like $.35/ea. They have worked fine for about 6 FCs and 4 FDs I've done.
Your original rings will look different because they are flattened, just buy some regular o-rings...
Jeff
I've gone to my local parts store several times to buy the o-rings for the oil filter pedestal, cost is like $.35/ea. They have worked fine for about 6 FCs and 4 FDs I've done.
Your original rings will look different because they are flattened, just buy some regular o-rings...
Jeff
Do you know the sizes? I'd rather not put my car out of commission before I have the pieces ready..
-Tesla
#6
Junior Member
Join Date: Sep 2001
Location: Northern Cali
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
How did it go Tesla?
Did you end up getting the o rings from mazdatrix or your local dealer? Or did you get some from an autoparts store? I'm curious because I also found a leak around the oil filter/pressure sender area and I'm not sure which it is so I figure I'd go with the cheaper fix first.
#7
Senior Member
Thread Starter
Join Date: Feb 2001
Location: louisville, KY
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
Re: How did it go Tesla?
Originally posted by RX-Revvin
Did you end up getting the o rings from mazdatrix or your local dealer? Or did you get some from an autoparts store? I'm curious because I also found a leak around the oil filter/pressure sender area and I'm not sure which it is so I figure I'd go with the cheaper fix first.
Did you end up getting the o rings from mazdatrix or your local dealer? Or did you get some from an autoparts store? I'm curious because I also found a leak around the oil filter/pressure sender area and I'm not sure which it is so I figure I'd go with the cheaper fix first.
-Tesla
Thread
Thread Starter
Forum
Replies
Last Post