oil cooler
10-29-06, 03:33 PM
#1
In rotaries we trust...
Thread Starter
Join Date: Nov 2005
Location: columbia/dutchess county NY
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler
i backed my FC out of my garage and there was a small spot, thought it was loose fluid. took it to school and when i left my friend pointed out the spot in the parking lot. so i wiped my finger around the bottom and there was small amounts of oil. theres not a large amount of leaking, but small drops. i lifted it up and this is what i found....
how much do new ones go for?used?
how much do new ones go for?used?
Last edited by hellisholds77; 10-29-06 at 03:36 PM.
10-29-06, 04:01 PM
#2
TIME ATTACK FD
iTrader: (8)
Join Date: Feb 2006
Location: Silicon Valley, CA
Posts: 624
Likes: 0
Received 0 Likes
on
0 Posts
An new oil cooler is pricey...
http://mazdatrix.com/getprice.asp?partnum=14-700A-N326
You can try to find a used one in decent shape thru Ebay or The 2nd Gen: For Sale Section...
http://mazdatrix.com/getprice.asp?partnum=14-700A-N326
You can try to find a used one in decent shape thru Ebay or The 2nd Gen: For Sale Section...
10-29-06, 04:29 PM
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Ouch! Get a used one from someone on this forum (classifieds) or from a junkyard. At the same time, clean and inspect the cooler hoses and replace the copper crush washers that seal the banjo bolts. These bolts are often TIGHT so don't be surprised if they are a real pain to remove. Also check the condition of the oil cooler mounts. They like to rot after a while...
Thread
Thread Starter
Forum
Replies
Last Post
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
