offset on rims
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: trinidad, West indies
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
offset on rims
Want to put some 245-50-16 on the rear and maybe 225-50-16 0n the front.Need to know what size rim width to get and what offset.
#2
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: offset on rims
Originally posted by london
Want to put some 245-50-16 on the rear and maybe 225-50-16 0n the front.Need to know what size rim width to get and what offset.
Want to put some 245-50-16 on the rear and maybe 225-50-16 0n the front.Need to know what size rim width to get and what offset.
I used to run 16x7, +32 mm front and rear with 225/50/16's.
I now have 18x8, +30 mm front with 225/40/18 and 18x9, +30 mm rear with 275/35/18.
#4
Rotary Enthusiast
Join Date: Apr 2001
Location: North Hollywood, Ca USA
Posts: 1,289
Likes: 0
Received 0 Likes
on
0 Posts
this will not fit without some modification to the strut and at least a 16x8 wheel, 16x9 would be best. I think the tire would be 245/45/16 also not 50 series. I use these tires on my track car and I use the 300zx turbo rear wheel offset 43mm I believe, but I had to custom build a set of strut tubes to gain clearance for the tires as well as rolling the fender lips. with the stock suspension it just won't fit
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM