Odd heating problem
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Jul 2007
Location: delta
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Odd heating problem
so recently i had to remove my entire intake manifold to get at my 6 port sleeves and primary injectors....
im almost 100% sure that everything is back to where it's suppose to be...
now to the problem.
i have no heat!
if i have my heater on wot and fan speed wot its kinda warm,,,, but only alittle. it seems the faster i drive or i suppose rev, the warmer it will get.
but heres the odd thing. if i have my recirculate on it gets warmer and blows some what more decent heat...
what could be the problem???
also i dont know if it's normal, but is it bad that my overflow bottle has boiling water in it.
yes i know the coolant is hot but is it abnormal for it to be boiling about in the bottle?
im almost 100% sure that everything is back to where it's suppose to be...
now to the problem.
i have no heat!
if i have my heater on wot and fan speed wot its kinda warm,,,, but only alittle. it seems the faster i drive or i suppose rev, the warmer it will get.
but heres the odd thing. if i have my recirculate on it gets warmer and blows some what more decent heat...
what could be the problem???
also i dont know if it's normal, but is it bad that my overflow bottle has boiling water in it.
yes i know the coolant is hot but is it abnormal for it to be boiling about in the bottle?
#2
Former Moderator. RIP Icemark.
so recently i had to remove my entire intake manifold to get at my 6 port sleeves and primary injectors....
im almost 100% sure that everything is back to where it's suppose to be...
now to the problem.
i have no heat!
if i have my heater on wot and fan speed wot its kinda warm,,,, but only alittle. it seems the faster i drive or i suppose rev, the warmer it will get.
but heres the odd thing. if i have my recirculate on it gets warmer and blows some what more decent heat...
what could be the problem???
also i dont know if it's normal, but is it bad that my overflow bottle has boiling water in it.
yes i know the coolant is hot but is it abnormal for it to be boiling about in the bottle?
im almost 100% sure that everything is back to where it's suppose to be...
now to the problem.
i have no heat!
if i have my heater on wot and fan speed wot its kinda warm,,,, but only alittle. it seems the faster i drive or i suppose rev, the warmer it will get.
but heres the odd thing. if i have my recirculate on it gets warmer and blows some what more decent heat...
what could be the problem???
also i dont know if it's normal, but is it bad that my overflow bottle has boiling water in it.
yes i know the coolant is hot but is it abnormal for it to be boiling about in the bottle?
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM