o2 sensor
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Altamonte Springs, FL
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
o2 sensor
ok i got my true dual put on. it has the slot for the o2 sensor. my friend put my headers on and the o2 sensor in but the son of a bitch couldnt find the cable for the o2 sensor again. can someone help me out, i was just browsing right now and i could see anything. anyone know where it is, or what page on the haynes manual that it shows it on?
#2
The wire of the O2 Sensor runs under the upper manifold near the rear of the engine. They often break or get burnt under the upper manifold. This could be your problem.
The wire harness that contains the O2 Wire starts in the passenger side ECU ..... Goes through the firewall on the passenger side ..... Runs under the upper manifold near the front of the engine .... Circles around to the back of the engine and under the upper manifold to the O2 sensor.
Hope this helps
George
The wire harness that contains the O2 Wire starts in the passenger side ECU ..... Goes through the firewall on the passenger side ..... Runs under the upper manifold near the front of the engine .... Circles around to the back of the engine and under the upper manifold to the O2 sensor.
Hope this helps
George
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM