Not getting any ground to coil packs
#1
Rotary Enthusiast
Thread Starter
Not getting any ground to coil packs
The ground wires that go to my coil packs are not working. I tested it with a test light and I have my Hot wires working great but not ground.
Any one know where these wires run to first. I checked my relays they seem to be fine.
Any one know where these wires run to first. I checked my relays they seem to be fine.
#2
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Your not looking at the wiring diagrams right.
The lead and trail coil assy's get their ground from the body of the coil/ignitor assy being attached to the chassis.
Unbolt a coil assy and rest it on a rag and you won't be able to start the car.
The single wire, bullet connector at the coil assy is NOT a ground wire. It's a diagnostic plug for a rpm meter etc/whatever. If you ground that wire, you have scrogged the car.
The lead and trail coil assy's get their ground from the body of the coil/ignitor assy being attached to the chassis.
Unbolt a coil assy and rest it on a rag and you won't be able to start the car.
The single wire, bullet connector at the coil assy is NOT a ground wire. It's a diagnostic plug for a rpm meter etc/whatever. If you ground that wire, you have scrogged the car.