No reversing light
You may wish to search on this, as it has been covered quite a few times.
Your reverse light switch is probably bad or disconnected. If it is abd, often times a relay will solve it at the lower current needed to trigger the relay is less than needed to light the bulbs.
Your reverse light switch is probably bad or disconnected. If it is abd, often times a relay will solve it at the lower current needed to trigger the relay is less than needed to light the bulbs.
The switch is on the left side of the transmission. It's a dual function switch. Reverse lights AND fifth gear switch.
I think you'll find maybe four wires on that switch. The two your interested in are the ones that are Red/Green and Black/Yellow. The Black/Yellow one is the pwr wire. The Red/Green goes to the tail reverse lights.
I believe they will be on seperate bullet connectors.
I think you'll find maybe four wires on that switch. The two your interested in are the ones that are Red/Green and Black/Yellow. The Black/Yellow one is the pwr wire. The Red/Green goes to the tail reverse lights.
I believe they will be on seperate bullet connectors.
Last edited by HAILERS; Nov 20, 2006 at 04:38 PM.
Trending Topics
it wasnt in my FC, but my S12 that I had this problem too. The switch worked, but the transmission for some reason wasnt pushing it. I just fastened a button onto the shift **** with a hose clamp and wired it in place of the sensor in the transmission. So whenever I reversed, I would just hit the button. It also worked great against tail-gaters on the highway :-D
Originally Posted by Mechanic
...or you can just live without reverse lights
lol,
lol,
Originally Posted by Mechanic
...or you can just live without reverse lights
lol, mine is random. works one time in reversse and possibly not the next time im in reverse.
lol, mine is random. works one time in reversse and possibly not the next time im in reverse.The issue with mines is that the switch on the transmission was broken.
Where can i get it? Then i guess i gotta figure out where to wire it, theres a big load of wires under the car all over the place.
Jason NYC
Originally Posted by toplessFC3Sman
it wasnt in my FC, but my S12 that I had this problem too. The switch worked, but the transmission for some reason wasnt pushing it. I just fastened a button onto the shift **** with a hose clamp and wired it in place of the sensor in the transmission. So whenever I reversed, I would just hit the button. It also worked great against tail-gaters on the highway :-D
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




