No Clutch Pedal
11-08-06, 06:16 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Indiana
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
No Clutch Pedal
im not sure wat is wrong but i bleed the clutch then i drive it for like 20 mins and it looses pressure and drops to the floor and wont return, i cant shift into gears, when i start it with the clutch down the car still moves forward, wat could this be?
11-08-06, 06:31 PM
#2
1200 gone......but......
iTrader: (24)
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
sounds like the hydraulics aren't holding up. slave cylinder or clutch master cylinder need to be looked at. just changed a slave cylinder out today for my friend on her 87 RX7. pedal went to the floor. now she is driving it around with a big smile. check the line too.
Last edited by RXnos1200; 11-08-06 at 06:49 PM.
11-08-06, 07:48 PM
#4
generally a failed master cylinder can seal up externally but bypass internally, if there is no air in the system and the slave is not moving with the pedal depressed and it isn't coming up i would bet $10 the master cylinder died. if it is leaking from around the top of the transmission(slave cylinder) area then you either have a ripped hose or faulty slave cylinder- a ripped hose is easy enough to see, the slave would be leaking around the boot.