Does anyone have the link to the topic on fixing little problems on the car that are cold solder connection related?

I want to take care of a few of these things while I have time this weekend.

Thanks.

 

Go here .....http://teamfc3s.org/main.shtml .....on the opening page click on where it has highlited *old site*. When you get there click on *Articles*. Lots of repairs. The new site is at this place.....http://www.fc3s.org/..... I have trouble accessing this site in that the left hand column does not show up. You might have better results.

 

One more time. Try this..http://teamfc3s.org/main.shtml...its the Trouble shooting section.

 

Just a hint... to fix your clock you need to re-solder the cold joints in the instrument/clock assembly, and I did this 2 years ago, it solved the problem, but now my clock is going on/off and resetting itself again. This is because I didn't remove the original solder that was there, I just soldered over it. I would highly suggest removing all of the solder and completely re-doing the imortant joints... otherwise you're going to have to do it again in a couple years.