no brake lights.
no brake lights.
Hey I have n/a fc 91.
I have no brake lights. Parking lights , interior lights okie, but when i step on the brakes the lights don't light up?. ??
- All the fuse are ok
- bulbs ok
- harness is plugged in
could it be the brake switch on the pedal? if so how do you remove it ? and test it ?
I have no brake lights. Parking lights , interior lights okie, but when i step on the brakes the lights don't light up?. ??
- All the fuse are ok
- bulbs ok
- harness is plugged in
could it be the brake switch on the pedal? if so how do you remove it ? and test it ?
Pull the elect plug off the brake pedal. Jumper the plug with a piece of wire. The brake lights should light up. IF they do, it isn't the switch. It could be the CPU or bad fuse.
Series four wiring attached.
I agree that it's probably the switch, but you can check it out prior to buying a switch.
Series four wiring attached.
I agree that it's probably the switch, but you can check it out prior to buying a switch.
would it matter what switch i put in ? with or without cruise control? i don't have any cruise control parts on my car would it still matter ? it used to have em expect I took em out.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
Tem120
3rd Generation Specific (1993-2002)
4
Sep 7, 2015 09:53 AM






