2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Nitrous

Thread Tools
 
Search this Thread
 
Old Feb 11, 2006 | 09:32 AM
  #1  
bigdaddyp's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 284
Likes: 0
From: King, NC
Nitrous

I have a quick easy question for nitrous. I bought a kit, and I have seen that some people just run the fuel line t-ed off of the secondary fuel rail hose. Is this ok to do? If so, where exactly is the secondary fuel rail?
Thanks in advance.
Reply
Old Feb 11, 2006 | 09:42 AM
  #2  
DemonicPupil's Avatar
AutoX Donut Maker
Tenured Member: 20 Years
 
Joined: Feb 2005
Posts: 792
Likes: 1
From: Annville, PA
Originally Posted by bigdaddyp
I have a quick easy question for nitrous. I bought a kit, and I have seen that some people just run the fuel line t-ed off of the secondary fuel rail hose. Is this ok to do? If so, where exactly is the secondary fuel rail?
Thanks in advance.
Secondary fuel rail on NA is looking you in the face if you look at the manifolds. it's bolted to the upper intake mani.

For the turbo, i believe it's attached to the lower intake?? underneath the upper. It's hidden away a little better than the NA secondary fuel rail.
Reply
Old Feb 13, 2006 | 08:19 AM
  #3  
bigdaddyp's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 284
Likes: 0
From: King, NC
so, where is the primary fuel rail then?
Reply
Old Feb 13, 2006 | 08:20 AM
  #4  
Whizbang's Avatar
Respecognize!
Tenured Member 20 Years
 
Joined: Sep 2004
Posts: 4,106
Likes: 72
From: Anchor Bay, CA
under the intake manifold.
Reply
Old Feb 13, 2006 | 08:23 AM
  #5  
Apathy's Avatar
dAracIngPhaRmaCist
Tenured Member 10 Years
 
Joined: Mar 2004
Posts: 877
Likes: 0
From: Fort Lauderdale
The primary fuel rail is sitting right on the block pretty much. Its underneath the upper intake manifold. If you look really careful you will see the plastic cap for the pulsation dampener, if it hasnt been burnt or removed. The pd is located on the end of the fuel rail. If you do a search for pulsation dampener you will find a pic of what it looks like.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
faster7
1st Generation Specific (1979-1985)
8
May 8, 2002 03:20 AM
sbrx7
1st Generation Specific (1979-1985)
3
Feb 7, 2002 12:53 PM
boostedyellow7
Single Turbo RX-7's
26
Jan 14, 2002 03:32 AM




All times are GMT -5. The time now is 09:31 AM.