imma newbie when it comes to timing and i have a question. i purchased my motor from atkins rotary (s5 GXL) and i got the stage 2 street port and the timing is off.i was told that all i would need to do is put t2 injectors in the secondaries and it would fix it. i also bought a apexi s-afc. i did that and it didnt work. i kno the timing is off and i want to set it so its right. only problem is, im not sure on what to set it to....i kno it wont be the stock timing because of the street port, so my question is how can i find out on exactly what degrees to set the timing. ive tried to set the timing b4 by setting the pulley on the yellow mark, then pulling out the CAS and setting it to the little divet and puttin it back in. then i tried adjustin the CAS and it helped alot but not enough. someone please help me. someone has to have had this same problem b4. what about those bridge ported ppl....i kno this has been posted b4, but this is different in my situation.

 

Timing procedures are outlined in the FSM, and injectors have NOTHING to do with timing. T

 

yes for stock timing, but what about a aggressive stage 2 street port?

 

would it still be the stock timing, even with a large street port?