Installed pics, and pics of lighting from inside car at night? Did it require any bumper cutting? I remember the previous thread about you making these, but can't find it now...

 

imo, screwed up the car!

 

Sorry, but I don't really like them.... But i've always been partial to the kind of lights that retract up and down.

 

yes the lights I made require cutting of the rad support. I made another set of lights similar to the ones that Ramy had using a headlight and fog and the lighting sucked and the lights were not adjustable.

My setup is basic really. I need to do a write up with pics but here is a basic explanation.

I removed my stock headlights, and with foam backed paperboard from wal mart and hot glue and a razor blade I cut out the bucket shape. After I had the basic shape I fiberglassed it together, and after the cure I did an *** load of bondo and shaping to get it all right.

After that I made molds of each side and now I had buckets. I am sure if you really wanted to make less involved buckets you could, or maybe even use sheetmetal or something.

I then cut holes for the projectors and install screws to hold the brackets down and put it all together.

 

Ewwwwwwwwwwwwwww