New Owner 1990 RX7... Questions
Thread Starter
Junior Member
Joined: Jun 2005
Posts: 8
Likes: 0
From: NYC
New Owner 1990 RX7... Questions
I have a 1990 RX7 with a rebuilt cosmo engine (Approx 700miles on it).... GT42 Turbo, MSD Ignition, Wolf 3D Standalone, HKS SSQ BOV, ACT Pressure Plate, Greddy Intercooler, and than some... I want some suggestions performance wise... Engine cooling? stability control and anything else you guys can think of... please let me know... Also curious to know when ROTO Fest is coming... Thanks guys... SHORCR18@HOTMAIL.COM
IT LIVES!!
Joined: Apr 2005
Posts: 466
Likes: 0
From: Manhattan Beach, CA
as far as cooling goes, ive only heared good thigns about koyo, and henry from mazdatrix runs a second oil cooler in his TII. hes run it long and hard on hot track days with absoloutly no problems. its a fairly easy mod, just get a second cooler, hoses, mounting brackets, etc. 
Seduced by the DARK SIDE
Joined: Apr 2001
Posts: 7,323
Likes: 2
From: Orange Park FL (near Jax)
Welcome to the forum.
It sounds like you have quite a beast there.
That oil cooler suggestion is right on.
The rotary engine gets nearly half of it's cooling through the oil.
The top & bottom ducting covers in front of the radiators are critical.
FWIW the stock engine driven fan & shroud pulls way more air than any electric fan.
It sounds like you have quite a beast there.
That oil cooler suggestion is right on.
The rotary engine gets nearly half of it's cooling through the oil.
The top & bottom ducting covers in front of the radiators are critical.
FWIW the stock engine driven fan & shroud pulls way more air than any electric fan.
Thread
Thread Starter
Forum
Replies
Last Post
