Ok so i put new primary injectors in my car today put everything back in started her up and she's leaking coolant and burning coolant, wtf! i took the intake off again and looked all around checked every hose and i couldn't find anything. I can't even find the exact spot it's leaking from, it's also puttering alot which i'm guessing is just because i need to re adjust the TPS. anyone have anyclue where the leak could be coming from. Also it's only leaking coolant on the passanger side of the engine, the drivers side is totally dry. TIA

 

Check for leaks around the BAC valve.
http://www.1300cc.com/howto/how2/bac.htm

 

if it's turbo it could be leaking from behind the lower intake manifold where the 2 coolant rings are for the coolant passages on the rotor housing

 

well the bac valve in on the drivers side and it's completly dry over there, it's a n/a. any other suggestions?