New Car - Turbo 2
02-26-02, 05:46 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Adelaide - Australia - The City Of Drift
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
New Car - Turbo 2
Hey all. my name is ben, im from adelaide Australia, just thort id check in and introduce myself.. i run a car club here (adelaide underground) setup mostly for late night drift and drag meets, and cruise all the time..
I just sold my series 1 rx7 (fairly modified) to buy my next beast, a series 4 GT limited,
Im flying interstate to buy it as of saturday..
i think its going to be good for mid-high 12s on 18psi of boost, and plan to drive it how it should be driven..
below are the specs...
1986 RX7 Series4 "GT Limited"
S4 13BT with S5 rotors, 3mm apex-seals & Extend Porting(Rebuilt by Autostyle)
Huge Custom FMIC (500mm x 300mm x 75mm)
Turbosmart type2 BOV
Simota Air Filter
Series5 Hi-Flo w/T04 "V" trim Compressor wheel (quite new)
Malpassi Fuel Pressure Regulator
Microtech MT8 ECU w/Handset
OS Giken 2 Plate Clutch/Chrome-moly Flywheel (quite new)
J Spec 4.1-1 LSD
Straight Thru 3inch into twin 2.5inch mandrel SS 'zaust
Porsche type fuel pump
Camaro Fuel Filter
Ford Alternator
Maztech Manual Boost Controller
INTERIOR & GADGETS
Omex Sequential Shift Light
Rich/Lean Display
Series6 RX7 Seats
Kenwood CD Player
Custom Interior
Autometer Boost Guage
MOMO Steering Wheel, Sparco Pedals (etc)
EXTERIOR & HANDLING
Wild Violet Respray
Custom Jetspeed Bodykit
17inch Mazdaspeed Gold 5spoke Rims
255 x 40 and 225 x 40 Bridgestone GridII FR17'a
Front KYB Coilovers
Rear Bilsteins and King Springs
Front Strut Tower Brace
Front Mild Negative Camber Pins
Gutted and Lightened~1140 kg
I just sold my series 1 rx7 (fairly modified) to buy my next beast, a series 4 GT limited,
Im flying interstate to buy it as of saturday..
i think its going to be good for mid-high 12s on 18psi of boost, and plan to drive it how it should be driven..
below are the specs...
1986 RX7 Series4 "GT Limited"
S4 13BT with S5 rotors, 3mm apex-seals & Extend Porting(Rebuilt by Autostyle)
Huge Custom FMIC (500mm x 300mm x 75mm)
Turbosmart type2 BOV
Simota Air Filter
Series5 Hi-Flo w/T04 "V" trim Compressor wheel (quite new)
Malpassi Fuel Pressure Regulator
Microtech MT8 ECU w/Handset
OS Giken 2 Plate Clutch/Chrome-moly Flywheel (quite new)
J Spec 4.1-1 LSD
Straight Thru 3inch into twin 2.5inch mandrel SS 'zaust
Porsche type fuel pump
Camaro Fuel Filter
Ford Alternator
Maztech Manual Boost Controller
INTERIOR & GADGETS
Omex Sequential Shift Light
Rich/Lean Display
Series6 RX7 Seats
Kenwood CD Player
Custom Interior
Autometer Boost Guage
MOMO Steering Wheel, Sparco Pedals (etc)
EXTERIOR & HANDLING
Wild Violet Respray
Custom Jetspeed Bodykit
17inch Mazdaspeed Gold 5spoke Rims
255 x 40 and 225 x 40 Bridgestone GridII FR17'a
Front KYB Coilovers
Rear Bilsteins and King Springs
Front Strut Tower Brace
Front Mild Negative Camber Pins
Gutted and Lightened~1140 kg
Trending Topics
02-26-02, 07:10 PM
#13
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Adelaide - Australia - The City Of Drift
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Its a Jetspeed item, and can b found here.
http://www.jetspeed.com.au/
i think their australian only tho...
http://www.jetspeed.com.au/
i think their australian only tho...
02-26-02, 07:24 PM
#15
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Adelaide - Australia - The City Of Drift
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
i havnt driven it YET, im used to drifting with a locked diff, which works quiet well if ur on a budget, cost me 10$ to do too..
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM