needs some help from you 2nd gen guys on efi 12a
Thread Starter
Senior Member
Joined: Oct 2003
Posts: 320
Likes: 0
From: warner robins, Georgia
needs some help from you 2nd gen guys on efi 12a
heres the thread https://www.rx7club.com/showthread.p...hreadid=326772
basically we want to use the gls-se center housing...then rig a lower intake to adapt on to the efi intakes (2nd or 3rd gen)
but my question for yall is...i hear that the 2nd gen ecu can run with the dizzy. so itll be a pretty much pulg, tune, and drive deal
(using an s4,s4 ecu with some type of efi controller)
can anyone help us out??\
Thanks
Brad
basically we want to use the gls-se center housing...then rig a lower intake to adapt on to the efi intakes (2nd or 3rd gen)
but my question for yall is...i hear that the 2nd gen ecu can run with the dizzy. so itll be a pretty much pulg, tune, and drive deal
(using an s4,s4 ecu with some type of efi controller)
can anyone help us out??\
Thanks
Brad
Lives on the Forum
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Re: needs some help from you 2nd gen guys on efi 12a
Originally posted by rx7anator
but my question for yall is...i hear that the 2nd gen ecu can run with the dizzy. so itll be a pretty much pulg, tune, and drive deal
(using an s4,s4 ecu with some type of efi controller)
but my question for yall is...i hear that the 2nd gen ecu can run with the dizzy. so itll be a pretty much pulg, tune, and drive deal
(using an s4,s4 ecu with some type of efi controller)
If the US-spec ECU does not have a CAS input, there is no RPM reference, and the engine will not go anywhere.
There are Euro-spec ECU's that do run dizzies.
You might want to drop a PM to hIGGI.
I think he has some spare Euro-spec S4 ECU's that originally ran dizzies, so no need for CAS.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post