need some help w/starting car =(
need some help w/starting car =(
i posted this in general support section but no one was replying... so i thought i'd post here
https://www.rx7club.com/showthread.p...=1#post3759445
https://www.rx7club.com/showthread.p...=1#post3759445
dude, it sounds like you have a major problem... coolant in the engine can fuxor everything unless you get it flushed completely...
did this just happen out of the blue or is it a rebuild or something?
did this just happen out of the blue or is it a rebuild or something?
When you take out the EGI fuse and remove the sparkplugs crank the engine with the accelerator all the way down. Then put Automatic transmisson fliud in the bottom two spark plug holes. Put everything back in and crank the engine. Try this about 2-3 times. If all else fails push start the car guranteed the car will start.
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
Aug 18, 2015 01:26 PM



