2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need a little bit of help with wheels...

Thread Tools
 
Search this Thread
 
Old Aug 17, 2014 | 08:07 AM
  #1  
Neverletdown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 5
Likes: 0
From: Kansas
need a little bit of help with wheels...

Ok so I have a 90' gxl and I plan on using it as a drag car. I have been trying to find what is the best/fattest tire you can fit. I've read thatbone people have been able to put 275/40 in there and then I've read where some just stay with a 245/50. Input please?
Reply
Old Aug 17, 2014 | 05:21 PM
  #2  
Rob XX 7's Avatar
FC guy
Tenured Member 20 Years
iTrader: (8)
 
Joined: Oct 2002
Posts: 8,713
Likes: 17
From: Long Island, New York
If its a na car the 245s will probably hook up fine and obviously be lighter
Reply
Old Aug 17, 2014 | 07:59 PM
  #3  
Fleemer's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2009
Posts: 290
Likes: 1
From: Victoria B.C.
You can fit 275s in the back, you'll need 17x10 +38 and a nice roll in the back.

Since your n/a you dont need such a wide tire and would benefit from less.

205-225 would be sufficient if your running a drag radial, if street tire maybe go up to 245.
Reply
Old Aug 17, 2014 | 08:43 PM
  #4  
Neverletdown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 5
Likes: 0
From: Kansas
Well im actually sbc powered lol. Right now I have 245/45 on 17x8. I wanted to drop down to a 15x9 and go 275 but didnt know if it was worth the trouble.
Reply
Old Aug 18, 2014 | 03:29 AM
  #5  
Fleemer's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Feb 2009
Posts: 290
Likes: 1
From: Victoria B.C.
Originally Posted by Neverletdown
Well im actually sbc powered lol. Right now I have 245/45 on 17x8. I wanted to drop down to a 15x9 and go 275 but didnt know if it was worth the trouble.
Its hard to find to correct offset to make a 275 work on stock fenders without mangling them.

Unless your running into traction problems i wouldn't move up.
Reply
Old Aug 19, 2014 | 12:29 PM
  #6  
Neverletdown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Nov 2006
Posts: 5
Likes: 0
From: Kansas
I have yet to get a set of drag radials but on brand new falkens I spin all the way through 3rd gear.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
djSL
The Bad & Fugly Businesses
24
Sep 21, 2017 03:09 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM




All times are GMT -5. The time now is 06:13 PM.