Need info. on How to......
04-22-02, 01:51 AM
#2
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,625
Likes: 0
Received 2 Likes
on
2 Posts
Ok, you're really in for it. All of this, just for me 
Well, first off, it starts from the passanger side of the car (goes in the firewall there, easy to spot) just follow it around and start unclipping it. You will probably have to take off the intercooler/upper intake to get to it all, as it runs to the injectors which are underneath. Then once it's completely disconnected from in the engine bay, head inside the car and pull the kickpanel off the passanger side. Then pull the carpeting back and theres the ECU where it's plugged in, disconnect it from there and follow it up to make sure it's not bolted down (I hear some are and some aren't) Disconnect it from the ECU and push it through the firewall, and tada, it's all done!
Well, first off, it starts from the passanger side of the car (goes in the firewall there, easy to spot) just follow it around and start unclipping it. You will probably have to take off the intercooler/upper intake to get to it all, as it runs to the injectors which are underneath. Then once it's completely disconnected from in the engine bay, head inside the car and pull the kickpanel off the passanger side. Then pull the carpeting back and theres the ECU where it's plugged in, disconnect it from there and follow it up to make sure it's not bolted down (I hear some are and some aren't) Disconnect it from the ECU and push it through the firewall, and tada, it's all done!
Thread
Thread Starter
Forum
Replies
Last Post
BLUE TII
Single Turbo RX-7's
10
09-26-15 10:12 PM