need hlpe plz FCD
#1
Newbie
Thread Starter
Join Date: Oct 2005
Location: Bahrain
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
need hlpe plz FCD
Hi guys
I am a new here and I need your help
I own a 240sx with CA18DET engine and it has a fuel cut
so
I need to DIY FCD file I do alot of search and I found the link but it is not work with me (Gateway Timeout)
here is the link
http://www.teamfc3s.org/info/articles/fcd/diy_fcd.htm
so if any one have this article and or know a diff. link plz tell me or give it to me if you have the article
need it asap
thanks for your help guys
I am a new here and I need your help
I own a 240sx with CA18DET engine and it has a fuel cut
so
I need to DIY FCD file I do alot of search and I found the link but it is not work with me (Gateway Timeout)
here is the link
http://www.teamfc3s.org/info/articles/fcd/diy_fcd.htm
so if any one have this article and or know a diff. link plz tell me or give it to me if you have the article
need it asap
thanks for your help guys
#3
Newbie
Thread Starter
Join Date: Oct 2005
Location: Bahrain
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
thanks for your reply
but I check agin but nothing found
if any one can reasch to this page plz put it in zip file and upload it as a attach. or send it to my E-mail
Mohnissan@hotmail.com
thanks for help
but I check agin but nothing found
if any one can reasch to this page plz put it in zip file and upload it as a attach. or send it to my E-mail
Mohnissan@hotmail.com
thanks for help
#6
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Um, are you looking for a FCD for your Nissan? The RX-7 uses the Bosch L-Jetronic EFI system. Make sure your car uses the same system and the same sensors, otherwise I doubt it's going to work.
#7
Newbie
Thread Starter
Join Date: Oct 2005
Location: Bahrain
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aaron Cake
Um, are you looking for a FCD for your Nissan? The RX-7 uses the Bosch L-Jetronic EFI system. Make sure your car uses the same system and the same sensors, otherwise I doubt it's going to work.
I know it is diff. between Nissan and mazda
in my car the signal for the ECU for fuel cutting came from the AFM when it reasch the 4.7v range (0V-5V)
so I will adj. the FCD for 4.7V not 3.33v (RX7 I think)
thanks for help
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
3
09-17-15 03:50 PM