Qhasan31

Ok, now I know you guys like it when ppl search the forum to find info, but I'm on my sidekick, so I can't really search with fast connection........
But yeah, today I was wiring up my deck, and for some reason, when I turned my lights on and off my antenna would come up and come down, but my deck wouldn't power up also, I connected the wires that needed to be connected, and it still wouldn't work......so if anyone can help out with the wiring that would be really helpful. My deck is a panasonic......

Thank you
Hasan

Akota

Did you buy a wiring harness? Or attempt to just plug them into the deck?

Qhasan31

I just tried to wire. Do I need to buy new wiring harness? And/or Run new wires from battery?

Icemark

Radio wiring including lighting and antenna information is found in the sticky thread, the FAQ for FC found at the top of this, the 2nd gen RX-7 technical section.

Thread closed. Covered in the FAQ for FC sticky thread.

https://www.rx7club.com/showthread.p...72#post5131072

Qhasan31

But, do the wires from the stock radio have clip on them? cuz it looks as if there was an aftermarket set up already in the car.... I think my brother said there was an alpine set up wires.......

Icemark

clips???

The stock plugs have pins. Either way if there was something other than stock wires you would remove them before wiring in another radio. If the stock plugs are there then an aftermarket adapter plug is recommened, so that you don't cut off the stock plugs.

Again this thread is closed. Please read the FAQ for C sticky thread before posting

and your mutiple bumps and the replies with wrong information have been deleted from this thread. Bumps are forbidden here in the 2nd gen RX-7 technical section