efini_hoe

iTrader: (1)

Hi I Just Swaped My 87 Tii In To A 91 At Chassis But The Bolts For The Transmission Crossmember Wont Line Up Its Like 6in Away Because It Was At I Herd That You Can Use Angle Iron To Fix This Problem But I Need Some Advice Please Help (rotary Love)

TehMonkay

iTrader: (-1)

You need to make an adapter or weld the mounts from the MT car into the automatic car. It's in the faq for the automatic tranny swap.

RotaryEvolution

iTrader: (30)

or you can cut out the mounts from a manual equipped car and weld them to the AT chassis, it's a pain though because the sound deadening tar likes to flash up during welding.