2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need help! sputtering from 3900 all the way up!

Thread Tools
 
Search this Thread
 
Old Dec 9, 2009 | 12:06 PM
  #1  
eric86rx7's Avatar
Thread Starter
Junior Member
 
Joined: May 2009
Posts: 25
Likes: 0
From: SO. CAL.
CA need help! sputtering from 3900 all the way up!

still trying to figure out the problem with this car its alarge street port 6 port it sputters from 3900 all the way to the shift point i have replaced the maf,tps,fuel pump and filter spark plugs fuel pressure regulator. my aux ports are working, no codes being displayed. I AM CLUELESS!!!!!!!!!!!!!!!!!!!!!!!! im in oxnard ca if anyone can help me or find me a shop to bring it into
Reply
Old Dec 9, 2009 | 12:35 PM
  #2  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
Sounds like your secondary injectors aren't right.
Reply
Old Dec 9, 2009 | 12:40 PM
  #3  
eric86rx7's Avatar
Thread Starter
Junior Member
 
Joined: May 2009
Posts: 25
Likes: 0
From: SO. CAL.
i have checked and replaced them with others that were in spec and the original set was also fine
Reply
Old Dec 9, 2009 | 07:28 PM
  #4  
ericgrau's Avatar
Clean.
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2005
Posts: 2,521
Likes: 3
From: Huntington Beach, CA
I'm guessing they aren't being activated properly then, perhaps an ECU problem.
Reply
Old Dec 9, 2009 | 07:40 PM
  #5  
Barnett87GXL's Avatar
< SPACE FOR RENT >
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jun 2009
Posts: 618
Likes: 9
From: Toronto
Originally Posted by ericgrau
I'm guessing they aren't being activated properly then, perhaps an ECU problem.
^Sounds something like that^
Reply
Old Dec 9, 2009 | 09:48 PM
  #6  
ITSWILL's Avatar
Wiring Nightmare
Tenured Member 15 Years
iTrader: (12)
 
Joined: Dec 2007
Posts: 1,714
Likes: 2
From: Ortonville, MI
with the ignition on you should see 5 volts on the injector plugs. check that out
Reply
Old Dec 10, 2009 | 12:54 AM
  #7  
therotaryrocket's Avatar
PIMP
Tenured Member 20 Years
 
Joined: Feb 2004
Posts: 1,012
Likes: 0
From: Greensboro, NC
sounds likely to be a ground problem, the ECU's main ground is under the throttle body on top of the engine, it's very important. Also check for a clogged catalytic convertor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PinkRacer
2nd Generation Specific (1986-1992)
43
Oct 1, 2015 09:13 AM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM
PhillyFC
General Rotary Tech Support
9
Aug 21, 2015 06:36 PM




All times are GMT -5. The time now is 12:08 AM.