Need Help Setting Up Tps?
10-17-08, 02:51 PM
#1
187 RX7 Gone To Heaven
Thread Starter
Join Date: Apr 2008
Location: Lakeland, Florida
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Need Help Setting Up Tps?
I just finished my microtech install and its all working properly. i just need help on how to set up the tps (not install it) but how do i get the throttle to push it in and out correctly?? should i remove all the throttle things and move it to the other side? or do i leave it where it is and find a way to get it to push the tps in and out
10-20-08, 10:16 AM
#3
187 RX7 Gone To Heaven
Thread Starter
Join Date: Apr 2008
Location: Lakeland, Florida
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
nothing it sits in the same place is just that the lil arm that pushes the tps in and out wont stay in place. so its not pushing it in and out accurately.. that side of the throttle has alot of slack and im new to the microtech stuff. i just figured i had to take some things off the throttle body
10-20-08, 10:53 AM
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
NO there are not dozens and dozens of threads with this problem. I can only guess, but it seems the throttle linkage is loose and flopping around. Got me. Make sure the TPS's bolts are snug. There shouldn't be any flopping around.
Take a picture of what your talking about. It's not clear just what is loose.
Take a picture of what your talking about. It's not clear just what is loose.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
befarrer
Microtech
3
08-22-15 05:52 PM