rx7_1.3

ok s5 na (89) and i just put A NEW clutch and tranny and i got it run but it won't idle and when i got to let off the e-brake it wants to staul dose any one have a clue what it could be

Icemark

Maybe if you had a real title someone would answer your question. Next time when you start a thread, start it with a clear and concise title that describes the problem to get more attention.

I have edited your title from "need help" to "need help, NEW clutch and tranny and it won't idle".

Your bump has been removed. Bumps are forbidden in the 2nd gen RX-7 technical section.

pistones

iTrader: (5)

sounds like the input shaft is not lined up with the clutch disk. therefore it is like the clutch is engaged all the time. time to take it all apart and see what you did wrong.

Turbo II Rotor

iTrader: (2)

What?

We need a better discription of the problem. It won't run when you lower the emergency brake? Try using 3 or more sentences to explain the problem.

rx7_1.3

ok, when i start to put the e-brake down it want to stall and when i do put it all the way down it DOSE stall

rx7_1.3

it is lined up the tranny went in with out fight and with the e-brake on i can let out the clutch and fell it catch so thats not it

pistones

iTrader: (5)

so you can start the car. it will idle with the clutch out? you can clutch in, all that with the e- brake on? am i getting that correctly?

rx7_1.3

the car won't idle right but i can start it and keep it runin with the clutch in or out but when i go to let the e-brake down it want to stall



and on it not idleing i think it is a vac line off ,but the e-brake i have no clue about