Need help identifying part
#1
Shake-zula, the mic rulah
Thread Starter
Need help identifying part
Have a part question regarding my NA to TII conversion.
In my 87 GXL there is a Denso rectangular metal box on the passenger side between the strut tower and headlight. It has a oval shape plug that goes to the NA harness.
On my 88 TII this part does not exist nor is there a plug for this component on the turbo harness. If anyone can identify this mystery part and what it does I would appreciate it greatly.
Derek
In my 87 GXL there is a Denso rectangular metal box on the passenger side between the strut tower and headlight. It has a oval shape plug that goes to the NA harness.
On my 88 TII this part does not exist nor is there a plug for this component on the turbo harness. If anyone can identify this mystery part and what it does I would appreciate it greatly.
Derek
#3
Daily Domestic Killer
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
pics would help greatly, prolly can find one around here, is it mounted on the inside fender, I believe is the fuel pump resistor or something along those lines
#6
Shake-zula, the mic rulah
Thread Starter
Definitly not the AFM or fuel pump resistor. Resistor pack on the other hand... If I'm going from an 87 NA motor w/ low impedence injectors to an 88 TII w/ high impedence injectors the resistor pack is just another item I can go ahead remove from the engine bay right?
#7
Senior Member
It IS the resistor block. I replaced the harness on my car and you can't get a new 88 engine harness any more, so I got a 87 which not only had the oval connector-- but different connectors for the injectors.
Finding a resistor pack is easy, make sure your injectors connect
Finding a resistor pack is easy, make sure your injectors connect
Thread
Thread Starter
Forum
Replies
Last Post
driftfcbuckey
The Bad & Fugly Members
10
12-02-15 05:48 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM