Need help fixing car
#1
Junior Member
Thread Starter
Join Date: Aug 2007
Location: Richmond
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Need help fixing car
Riding in my 1987 n/a coupe in the rain today and my tires had no thread and I was turning. My car started to slide and I hit the curb hard enough to scratch the rim and set the alignment off at least by 90 degrees I think. Don't know much about Rx-7's but I started searching around and found the picture of what was bent. I know need know how to fix it, please help. I need to know how much is the cost and how hard for installations. Thank you.
#2
Eat Rice Don't Drive it.
iTrader: (3)
Your wheel bent 90* ? That is from l to --
The pic is your steering rack. A used one might only run you like 45-50 bucks depending on your local junk yards but new they cost a few hundred dollars. Since you don't know much about working on cars i'd suggest having a shop do the work for you.
The pic is your steering rack. A used one might only run you like 45-50 bucks depending on your local junk yards but new they cost a few hundred dollars. Since you don't know much about working on cars i'd suggest having a shop do the work for you.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
rkhanso
2nd Generation Specific (1986-1992)
1
08-13-15 11:40 AM