need help dressing up engine bay 89 t2
#1
Rotary Freak
Thread Starter
need help dressing up engine bay 89 t2
i'm going to be dressing up my engine bay with some colored wires, hoses, ect... does anyone know where they sell these parts in red for a 89 t2 or do i need to get acouple feet of hose and cut to the length i need i'm going to be getting my intake manifolds powder coated and some other parts i think i'm going to go with red since it's a black turbo 2 also if anyone knows some things to make it look better or has any pics of there engine bay that would be nice here's a pic of mine right now
#4
(_8(|)
Join Date: Jul 2004
Location: Manhattan, Kansas
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
somehting you couls do and looks nice is get a platethat goes above the rad, and covers the overflow bottle and whatnot. Also a good reliability thing you could do would be to swap out all vacuum lines for some silicone lines, they usually come in colors, so that would look nice and function well
#6
Driveline Killer
Join Date: Jul 2004
Location: OC the wicked 714
Posts: 1,463
Likes: 0
Received 0 Likes
on
0 Posts
ok first to each his own....if he want sto rice it out so be it.....hahhaha
But here is a good starting point as far as I'm concerned.
The mechaical fan is fine for all uses but it takes up a lot of room.....Changing to an electrical fan not only gives you more control over your cars running temperature since you can switch it on and off but it also elimiates alot of clutter under the hood. When you pop the hood on a stock FC you see a big shroud with a long shank and a fan and clutch on the end of it.
Or you can swap to electrical fan and have a fan that sits on the radiator and only pops back about 3-4 inches at the motor.
Makes for a cleaner look.
Then of course there is always the removal of the rats nest or emmisions and vacuum lines. Who needs those, it's just a bunch of atmosphere friendly crap that clutters up and holds heat under the hood.
What ever you choose to do keep reliability in mind first then go for your "bling" ........that 's my opinion on it all.
But here is a good starting point as far as I'm concerned.
The mechaical fan is fine for all uses but it takes up a lot of room.....Changing to an electrical fan not only gives you more control over your cars running temperature since you can switch it on and off but it also elimiates alot of clutter under the hood. When you pop the hood on a stock FC you see a big shroud with a long shank and a fan and clutch on the end of it.
Or you can swap to electrical fan and have a fan that sits on the radiator and only pops back about 3-4 inches at the motor.
Makes for a cleaner look.
Then of course there is always the removal of the rats nest or emmisions and vacuum lines. Who needs those, it's just a bunch of atmosphere friendly crap that clutters up and holds heat under the hood.
What ever you choose to do keep reliability in mind first then go for your "bling" ........that 's my opinion on it all.
#7
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Originally Posted by slpin
why do you want to ruin a good looking engine bay with weird gay *** colored ricer hoses, bling and ****?
Trending Topics
#9
Rotary Freak
Thread Starter
i removed the intake snorkle along time ago those pics are almost a year old i don't intend it to be rice at all i'm not doing all of them just some to give it abit more eye catching while replacing the old one's since it's 16 years old and i want to keep it nice i want to keep everything for emmisions and keep the a/c p/s
#11
The end of an era
iTrader: (4)
Take off ps, ac, air pump, emissions. A simple looking bay is a sexy bay.
Paint whatever parts you can remove with the dupli color paint or the chrome 500 degree paint, you don't need to powder coat things, that money can be used elsewhere.
Get a cold air box, and get a battery box to hide the battery.
Wax the paint in the engine bay and clean up all the plastic with some armor all or something.
That will make your bay look simple, nice and clean. And if you buy that neon autozone/pepboys silicone hose its most likely a crappy hose and will give you problems.
-Andrew
Paint whatever parts you can remove with the dupli color paint or the chrome 500 degree paint, you don't need to powder coat things, that money can be used elsewhere.
Get a cold air box, and get a battery box to hide the battery.
Wax the paint in the engine bay and clean up all the plastic with some armor all or something.
That will make your bay look simple, nice and clean. And if you buy that neon autozone/pepboys silicone hose its most likely a crappy hose and will give you problems.
-Andrew
#12
Rotary Freak
Thread Starter
i don't plan on buying the hose there maybe jegs or something because of the quality and all anyone know where to get some for a good price i want to keep my accesories i like the luxury of them anyone know of any wires or anything i can get rid of that won't effect emmision's and i can pass without problems in this link is what i basically want done to my engine bay https://www.rx7club.com/showthread.p...1&page=2&pp=15
#14
Haven't we ALL heard this
Wow, that is one nice ignition setup man!
What are all those wires next to the drivers flip up light? More IGN stuff?
Very clean and you even still have ABS. That rocks
What are all those wires next to the drivers flip up light? More IGN stuff?
Very clean and you even still have ABS. That rocks
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM