So i brought the block off plate kit from banzai for the s5 t2. I just thought about it and the Acv has the hose that goes to the map sensor so how do i use this plate? Is it as simple as i don't?

 

Post a much larger picture of the girl and we'll tell you exactly how to do it. Picture first.

 

Technical help comes at a price sometimes.

 

l help you out op

 

I don't even remember what the original question was.

 

 

I've just been connecting the map to any vac nipple I can find, then again, mine doesn't run the best and is N/A

 

wow well I wish I knew how to help, I wish my car came with one of those,

 

mesure the vaccum nipple from one of the bolt holes and drill a hole in it buy a vaccum nipple from the parts store and your set. I just Teed into the BOV line. I actually have it X'd and it runs Boost gauge, MAP, and BOV. seems to work fine. MY idle is really low though. I also have an FCD so its kind of retarded anyways.

 

This thread should be stickied just for those pics.

 

thats what im talkin about

 

Well done with the pictures!

What you do for the CAR, is buy a plastic tee from the auto store.

Then you find the vacuum line going to the stock AIR BYPASS VALVE and install the tee into that vacuum line and plug the line from the pressure sensor into that new tee. Done See the jpg.

The pictures were very welcome and she sure looks healthy and wish her the best. Thank you.

 

Definitely use a Block off plate...
you said Vacuum NIPPLE!...
..ah just kiddin man,Just look at the Throttle body.It has some Vacuum Nipples that are not used,You can hook up there,or Swing around to the inside of the manifold,
you can always T as Hailers Said to a vacuum source already being used.It is just a matter of buying a T,and using a small piece of tubing.
Good Luck..and Say HI to What's her name again For me.,
tell her I was the guy that Said HI at that place ...where she was,,,about a Week ago...(ya,right..)Cheers STYX!