2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Need Help ASAP!!!!

Thread Tools
 
Search this Thread
 
Old May 23, 2002 | 07:31 PM
  #1  
Angel Guard Racing Team's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Need Help ASAP!!!!

My injectors are not pulsating while craknking, so my car won't start after puting the engine back in. It was working just right. I need some diagrams quick!!!. Also when I turn the key the starter won't go. It will turn if I short it but it won't turn from inside the car. There is spark when I get the starter going manually but no gas from the injectors. The pump is working fine. I know I must have hooked something wrong I need a diagram quick!!!! search did not work...
Reply
Old May 23, 2002 | 07:41 PM
  #2  
dwillms's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Oct 2001
Posts: 222
Likes: 0
From: Vancouver - abbotsford
check the nuetral/reverse cable to your transmission? I dunno my friend had the same problem.
Reply
Old May 23, 2002 | 07:48 PM
  #3  
Angel Guard Racing Team's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
It is automatic tranny but I did not remove cables from it (I hope)
Reply
Old May 23, 2002 | 08:10 PM
  #4  
Angel Guard Racing Team's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
BUMP
Reply
Old May 23, 2002 | 09:00 PM
  #5  
Angel Guard Racing Team's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Help!!!!!!!!!!!!!!!Help!!!!!!!!!!!!!!!!!!Help!!!!! !!!!!!!!!!!!!!
Reply
Old May 23, 2002 | 09:45 PM
  #6  
autocrash's Avatar
Now with more 1st Gen!
Tenured Member 15 Years
 
Joined: Dec 2001
Posts: 1,534
Likes: 0
From: Ottawa
have you checked the tranny cables yet?
Reply
Old May 24, 2002 | 03:24 PM
  #7  
Angel Guard Racing Team's Avatar
Thread Starter
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Two problems:
1: Only will start on "N" which means that the cable got fucked some how.
2: One of the injector plugs had to be replaced.

Working fine exept for the "N" starting.
Reply




All times are GMT -5. The time now is 06:29 AM.