2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need help asap

Thread Tools
 
Search this Thread
 
Old Sep 4, 2005 | 02:46 PM
  #1  
breckboarder55's Avatar
Thread Starter
big port + big turbo=
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 661
Likes: 0
From: 10 mins from Texas World Speedway
need help asap

Turbo 2 idles low, and when driving if i go into boost it hesitates like crazy but only does this in boost its like i only get power on off randomly when in boost, what is wrong and are there any recomendations to a place in houston were it can be fixed
asap
thanks
Reply
Old Sep 4, 2005 | 03:10 PM
  #2  
2slow4stock's Avatar
The waiting game......
Tenured Member 15 Years
iTrader: (18)
 
Joined: Feb 2005
Posts: 2,275
Likes: 3
From: North Aurora
check vac. lines you could have a leak somewhere to cause the boost to go berzerk. My .02cents correct me if i'm wrong.
Reply
Old Sep 4, 2005 | 03:20 PM
  #3  
fc3sfreek's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,101
Likes: 0
From: Kissimmee Fl,
my car did the same thing , I looked under the hood and it ended up my CAS was all the way to the right. i put it bak in the middle and it went away........... then my flywheel fell off and now my car is sitting in the driveway waiting for a 2 1/8" socket...
Reply
Old Sep 4, 2005 | 04:34 PM
  #4  
breckboarder55's Avatar
Thread Starter
big port + big turbo=
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 661
Likes: 0
From: 10 mins from Texas World Speedway
sorry but whats CAS stand for
Reply
Old Sep 4, 2005 | 04:42 PM
  #5  
fc3sfreek's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,101
Likes: 0
From: Kissimmee Fl,
crank angle sensor, its the thing that pretty much sets your timing. from what i know it should be near the middle.
Reply
Old Sep 4, 2005 | 05:37 PM
  #6  
breckboarder55's Avatar
Thread Starter
big port + big turbo=
Tenured Member 10 Years
 
Joined: Apr 2005
Posts: 661
Likes: 0
From: 10 mins from Texas World Speedway
ahh ill post a pic in a while of what i did /happened but it looked like a vac line running to a sencor in the intake (not 02 though) had poped out
i pushed it in and sealed it up and its running fine now? weird i also put some injector cleaner in.
thanks for your help
Reply




All times are GMT -5. The time now is 02:02 PM.