RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   need help asap (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/need-help-asap-459947/)

breckboarder55 09-04-05 02:46 PM

need help asap
 
Turbo 2 idles low, and when driving if i go into boost it hesitates like crazy but only does this in boost its like i only get power on off randomly when in boost, what is wrong and are there any recomendations to a place in houston were it can be fixed
asap
thanks

2slow4stock 09-04-05 03:10 PM

check vac. lines you could have a leak somewhere to cause the boost to go berzerk. My .02cents correct me if i'm wrong.

fc3sfreek 09-04-05 03:20 PM

my car did the same thing , I looked under the hood and it ended up my CAS was all the way to the right. i put it bak in the middle and it went away........... then my flywheel fell off and now my car is sitting in the driveway waiting for a 2 1/8" socket...

breckboarder55 09-04-05 04:34 PM

sorry but whats CAS stand for

fc3sfreek 09-04-05 04:42 PM

crank angle sensor, its the thing that pretty much sets your timing. from what i know it should be near the middle.

breckboarder55 09-04-05 05:37 PM

ahh ill post a pic in a while of what i did /happened but it looked like a vac line running to a sencor in the intake (not 02 though) had poped out
i pushed it in and sealed it up and its running fine now? weird i also put some injector cleaner in.
thanks for your help


All times are GMT -5. The time now is 07:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands